世格比例調節電磁閥技術指標，EFJ8210D14[產品打印頁面]

世格比例調節電磁閥技術指標，EFJ8210D14
上海乾拓貿易有限公司
聯系人：楊江玲
企業QQ：2880626083
手 機：18917074297（微信）
電 話：021-39529830-8012
郵箱；18917074297@163.com
地址：上海市嘉定區江橋嘉涌路6號樓713室
特點：
?ow control of water and other non-corrosive liquids
? Special valve design to reduce pressure surges to a minimum,
先導式,常閉,黃銅,介質溫度:-10℃～+90℃，
preventing waterhammer and ensuring noise-free closing
? The solenoid valves satisfy all relevant EC directives
G螺紋,口徑:3/8-1/2,操作壓差：0.3-10公斤
Open loop proportional valves for automatic
技術參數：
Maximum viscosity  40 cSt (mm2/s) ? uids (?) temperature range
(TS) (1) seal materials (?) water, oil - 10°C to + 90°C NBR (nitrile)
Hysteresis < 7,5 % ; Repeatability < 3 % ; Sensitivity < 2 %
Voltage regulation 0 - 24 V DC 24 V DC pulse width modulated
(300 Hz) Flow regulation characteristics  
Moulded IP65 (EN 60529) Standard voltages DC (=) : 24V (Other voltages on request)
 Connector speci? cation ISO 4400 / EN 175301-803,
form A Electrical safety IEC 335 Electrical enclosure protection
Differential pressure See ?SPECIFICATIONS? [1 bar =100  kPa]
Coil insulation class F Connector Spade plug (cable ? 6-10 mm)
簡介：
 For optimum performance mount solenoid vertical and upright
unit (catalogue number: E908A001, see V150)
The solenoid valves can be mounted in any position without affecting operation.
? Waterproof enclosure with embedded screw terminal
 Valves can also be supplied with FPM (? uoroelastomer) seals and discs
? Threaded pipe connection is standard: G = G (ISO 228/1)
? Installation/maintenance instructions are included with each valve
 categories 2-3 to ATEX Directive 94/9/EC, on request
coil according to protection class IP67, CEE-10
? Explosionproof enclosures for use in zones 1/21-2/22,
? Electrical enclosures according to “NEMA” standards are available
? Mounting brackets ? Electronic proportional control

世格比例調節電磁閥技術指標，EFJ8210D14

產品留言

標題

聯系人

聯系電話

內容

驗證碼

點擊換一張

注：1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
2.如有必要,請您留下您的詳細聯系方式!