圖爾克壓力變送器，PS100R-301-LI2UPN8X-H1141
Rigid process connection, non-rotatable body
Reading of adjusted values without tools
Secure programming through recessed pushbutton and keylock
Permanent indication of pressure (bar, psi, kPa, MPa, misc)
Peak pressure memory
壓力范圍0…100 bar rel.
功能原理
PＳ系列壓力傳感器采用壓敏電阻式陶瓷膜
片。 硅膜片與所對應的被測壓力是不平衡的。
基于不同的傳感器型號，產生的電壓值被處理
成開關量或模擬量信號。 本體可旋轉和不可旋
轉類型的傳感器，多種過程連接方式，齊平膜
片或無死區壓力感應膜片，測量精量為滿量程
的0.5%,高靈活性及牢固的過程接口。
相對壓力0…100bar rel.
工作范圍0…1450psi
工作范圍0…10MPa
可耐過壓ð 450 bar
Burst pressure ï 450 bar
供電
工作電壓18…30VDC
空載電流I0 ð 50 mA
壓降在 Ie ð 2 V
測量保護SELV、PELV符合EN 50178標準
Short-circuit/reverse polarity protection 是/ 是
防護類型和等級IP67 / IP69K/ III
輸出
1路輸出開關量輸出或IO-LINK模式
2路輸出模擬量或開關量輸出
開關量輸出
輸出性能常開/常閉 , PNP/NPN
Accuracy switching output ± 0.5 % v. E. BSL
額定工作電流0.2 A
開關頻率ð 180 Hz
開關點距離ï 0.5 %
開關點： (小 + 0.005 x range) up to 100% f.s.
釋放點小可達(SP - 0.005 x range)
在頻繁開關ï 100 ms
模擬量輸出
電流輸出4…20mA
工作范圍4…20/ 0…20 mA (3線)
負載： ð 0.5 kò
精度LHR 模擬量輸出± 0.5 BSL終值 %
響應時間< 3 ms
IO-Link
通訊specified acc. to version 1.0
參數化FDT / DTM
傳輸方式corresponds to 3-wire physics (PHY2)
傳輸速率COM 2 / 38.4 kbps
處理數據寬度16 bit
測量值信息14 bit
開關點信息2 bit
框架類型2.2
Genauigkeit ± 0.5 BSL終值 %
Accuracy 0.5 % f.s.
IP68/IP69K
High overload resistance
Stainless steel housing, fully encapsulated,
rotatable display
Measuring range -1…+600 bar relative
pressure
VDMA menu guide acc. to VDMA
standard sheet 24574-1 (optional)
Stainless steel 1.4305 (AISI 303)
The sensors of the PS-300 series are rugged
and IP69K rated. Thanks to the broad
measuring range of -1 to +600 bar, they
can be applied in numerous hydraulic
applications, even in the harshest environments.
The measured signals are
processed on a ceramic thick-film pressure
measuring cell and transferred as a
digitized value to the fully encapsulated
processor electronics.
