專業經銷ASCO電磁閥，NFG353A043 24VDC[產品打印頁面]

專業經銷ASCO電磁閥，NFG353A043 24VDC
ASCO TRI-POINT switches are available in either a
general purpose or watertight enclosure, in addition to
open frame construction. These enclosed units are
made in accordance with NEMA and UL standards.
These standards define the protection level an
enclosure gives and the tests it must pass to meet
particular design.
General Purpose – Type 1. These enclosures are
ASCO阿斯卡直動式電磁閥高溫流體：要選擇采用耐高溫的電工材料和密封材料制造的電磁閥，而且要選擇活塞式結構類型的。
3、美國ASCO阿斯卡直動式電磁閥流體狀態：大至有氣態，液態或混合狀態，特別是口徑大于DN25訂貨時一定要區分開來。
4、流體粘度：通常在50cSt以下可任意選擇，若超過此值，則要選用高粘度電磁閥。
    美國阿斯卡ASCO直動式電磁閥8262
三、美國ASCO阿斯卡直動式電磁閥根據壓力參數選擇電磁閥的：原理和結構品種
1、美國ASCO阿斯卡直動式電磁閥公稱壓力：這個參數與其它通用閥門的含義是一樣的，是根據管道公稱壓力來定。
2、美國ASCO阿斯卡直動式電磁閥工作壓力：如果工作壓力低則必須選用直動或分步直動式原理；低工作壓差在0.04Mpa以上時直動式、分步直動式、先導式均可選用。
designed for indoor use to protect personnel from
accidental contact with the equipment. P-Series
general purpose enclosures are painted, zinc-coated
steel and have a 7/8” diameter hole at the top for
electrical entry.
Watertight – Type 4.Watertight and dust-tight
enclosures are intended for use indoors and outdoors
to protect the enclosed equipment against splashing or
falling water, windblown dust and water, hose directed
water, and severe external condensation. P-Series
watertight switch enclosures are epoxy-painted, zinccoated
steel with a 1/2” conduit hub in the side of the
lower housing for electrical entry. (For optional 316 SS
watertight enclosure see page 13.)

專業經銷ASCO電磁閥，NFG353A043 24VDC

 

產品留言

標題

聯系人

聯系電話

內容

驗證碼

點擊換一張

注：1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
2.如有必要,請您留下您的詳細聯系方式!